BT Wholesale
PSTN Provisioning Manual

Register with bt wholesale

* All Fields Must Be Completed


Customer´s Details

Operator Details

Does this SSQ supercede an earlier SSQ?
(If Yes enter Superceded SSQ Ref No.)


Compliance To SS7 Specifications

Please indicate whether compliance statements relating to the following specifications have been provided by the supplier:
Copies of the current specifications are available
(NB this is the UK industry website, not a BT website)
there is also a summary of the compliance statement requirements summary of the compliance statement requirements.

User Part NICC Document PNO Document        
MTP ND 1005: 2008/08 PNO-ISC/SPEC/005 Issue 3    
IUP ND 1006: 2001/06 PNO-ISC/SPEC/006 Issue 4  
Env-ISUP ND 1104: 2003/02 PNO-ISC/SPEC/004 Issue 2  
UK-ISUP ND 1007: XXXX/XX PNO-ISC/SPEC/007 Issue X
UK-ISUP ND 1008: 2001/07 PNO-ISC/SPEC/008 Issue 2  

As part of the SS7 compliance statement mentioned above, there are a number of items within PNO-ISC/SPEC/005 that require further information as options are given within the specification. The following questions are designed to identify the sections where alternatives apply and the option that has been implemented within the Operator’s switch.

Time-out values

What values are the Time-Outs set to as referred to in:

Please give details in seconds, eg 1.20 for 1200ms, and give details to 2 places of decimals, eg 0.nn, n.nn or nn.nn, or enter N/A if the option is Not Applicable to your system.

Q703, ss12.3


Q704, ss16.8


(Only applicable if node is connected to an STP.)






(Only applicable if node is an STP and Q.704 1996 restart is used.)

(Only applicable if node is an STP and Q.704 1996 restart is used.)

(Only applicable if Q.704 1996 restart is used.)

(Only applicable if Q.704 1996 restart is used.)

(Only applicable if national option for processor outage is used.)
     

Q707, ss5.5

   

Routing of Messages

This question only applies to an Operator which is using STP Units within their own network, please enter N/A if this is not applicable